Enter the IP addresses of up to four Syslog receiver hosts.

The number of packets sent to each configured host will be displayed next to its IP address.

A configurable value for the purposes of identifying events from the MCU on the Syslog host. Choose from the following options:

• 0 - kernel messages
• 1 - user-level messages
• 2 - mail system
• 3 - system daemons
• 4 - security/authorization messages (see Note 1)
• 5 - messages generated internally by syslogd
• 6 - line printer subsystem
• 7 - network news subsystem
• 8 - UUCP subsystem
• 9 - clock daemon (see Note 2)
• 10 - security/authorization messages (see Note 1)
• 11 - FTP daemon
• 12 - NTP subsystem
• 13 - log audit (see Note 1)
• 14 - log alert (see Note 1)
• 15 - clock daemon (see Note 2)
• 16 - local use 0 (local0)
• 17 - local use 1 (local1)
• 18 - local use 2 (local2)
• 19 - local use 3 (local3)
• 20 - local use 4 (local4)
• 21 - local use 5 (local5)
• 22 - local use 6 (local6)
• 23 - local use 7 (local7)

Choose a value that you will remember as being the MCU.

Note: Various operating system daemons and processes have been found to utilize Facilities 4, 10, 13 and 14 for security/authorization, audit, and alert messages which seem to be similar.

Various operating systems have been found to utilize both Facilities 9 and 15 for clock (cron/at) messages.

Processes and daemons that have not been explicitly assigned a Facility value may use any of the "local use" facilities (16 to 21) or they may use the "user-level" facility (1) - and these are the values that we recommend you select.